11
In alcuni programmi di Plug-n-Play BIOS può verificarsi che
venga assegnato alla scheda Gigabit Ethernet un interrupt già
assegnato a qualche altro dispositivo. Il conflitto di interrupt
può causare problemi rendendo inusabili entrambi i dispositivi.
In questo caso è necessario lanciare il CMOS Setup utility e
manualmente assegnare un numero di interrupt che non
generi conflitti.
3.3
Installazione software
Prima di collegare il dispositivo alla rete è necessario aver installato i driver. I driver,
per ogni sistema operativo, sono sistemati in diverse directory all’interno del CD-
Rom fornito a corredo.
Per eseguire correttamente l’installazione dei driver e dell’utilità di gestione del
dispositivo, è consigliato seguire la procedura indicata:
1.
Inserire il CD-Rom contenuto nella confezione e attendere l’avvio del
programma Autorun.
Nel caso in cui l’avvio automatico sia stato disabilitato da SO,
accedere al contenuto dello stesso e lanciare l’installazione
manualmente
dal
percorso:
<CDROM>:\A02-
SG32\Driver\<OSVer>\SETUP.EXE.
2.
Cliccare “
A02-SG32
”” per accedere alla pagina relativa al prodotto.
3.
Selezionare l’opzione desiderata, in relazione al sistema operativo
utilizzato, per avviare il programma di installazione del dispositivo.