11
3.
Installazione
Questo capitolo fornisce informazioni per l‟installazione e la configurazione dello
Switch. Per evitare possibili cause di danneggiamento è opportuno leggere
attentamente l‟intero paragrafo prima di partire.
3.1
Contenuto della Confezione
Una volta aperta la confezione in cartone dovrebbero essere presenti:
16/24 porte 10/100Mbps Fast Ethernet Switch
Cavo di alimentazione
Supporti in gomma per il montaggio desktop
Kit di installazione per strutture rack 19”
Guida Utente (Italiano, Inglese e Francese)
Qualora mancasse uno qualsiasi di questi componenti è opportuno rivolgersi
immediatamente al rivenditore.
3.2
Setup
La fase di setup dello Switch prevede i seguenti steps:
La presa elettrica deve essere entro 1.82 metri dall‟apparecchio.
Assicurarsi che la presa del cavo di alimentazione sia collegata
propriamente al connettore AC posto sul pannello posteriore
dell‟apparecchio.
Accertarsi che sia posto in un ambiente con un‟adeguata ventilazione,
non esposto a raggi solari, in un ambiente privo di vibrazioni e in
assenza di forti campi elettromagnetici (tipicamente creati da motori
elettrici).
Controllare inoltre le condizioni di temperatura ed umidità (facendo
riferimento alla tabella Caratteristiche Fisiche ed Ambientali).