Atlantis A03-OP1001, User Manual

Page: 40 / 56

ENG
40
 Setting mode: Press and hold this button for 5 seconds
to enter UPS setting mode when UPS is in standby mode
or bypass mode.
 Down key: Press this button to display next selection in
UPS setting mode.
ON/MUTE +
SELECT
 Switch to bypass mode: When the main power is
normal, press ON/Mute and Select buttons
simultaneously for 5 seconds. Then UPS will enter to
bypass mode. This action will be ineffective when the
input voltage is out of acceptable range.
3.2 LED Panel
Indicators Functions
Fault Information
Indicates that the warning and fault occurs.
Indicates the warning and fault codes, and
the codes are listed in details in 3-6 and 3-8
sections.