Atlantis A03-OP1001, User Manual

Page: 38 / 56

ENG
38
To allow for unattended UPS shutdown/start-up and status monitoring, connect the
communication cable one end to the RS-232 port and the other to the communication
port of your PC. With the monitoring software installed, you can schedule UPS
shutdown/start-up and monitor UPS status through PC. When installing with these
communication card in the UPS, it will provide advanced communication and
monitoring options.
USB port and RS-232 port can’t work at the same
time
.
Step 5: Turn on the UPS
Press the ON/Mute button on the front panel for two seconds to power on the UPS.
The battery charges fully during the first five hours of
normal operation. Do not expect full battery run
capability during this initial charge period.
Step 6: Install software
For optimal computer system protection, install UPS monitoring software to fully
configure UPS shutdown. Please follow steps below to download and install
monitoring software:
 Download and install software from www.atlantis-land.com .
 See software document for installation instruction.
 When your computer restarts, the monitoring software will appear as an orange
plug icon ( ) located in the system tray, near the clock.