Atlantis Land Web Share 3G 244WN, User Manual

Page: 57 / 133

57
If the packet is high priority, it will flow first and will not be constrained by the Rate
Limit. Therefore, when this feature is enabled, the router’s Ethernet switch will check
the 2nd octet of each IP packet. If the value in the TOS field matches the checked
values in the table (0 to 63), this packet will be treated as high priority.
7.1.10 DHCP Server
You can disable or enable the DHCP (Dynamic Host Configuration Protocol) server or
enable the router’s DHCP relay functions. The DHCP protocol allows your router to
dynamically assign IP addresses to PCs on your network if they are configured to
obtain IP addresses automatically.
To disable the router’s DHCP Server, check Disabled and click Next , then click
Apply . When the DHCP Server is disabled you will need to manually assign a fixed IP
address to each PCs on your network, and set the default gateway for each PCs to the
IP address of the router (by default this is 192.168.1.254).
To configure the router’s DHCP Server, check DHCP Server and click Next . You can
then configure parameters of the DHCP Server including the IP pool (starting IP
address and ending IP address to be allocated to PCs on your network), lease time for
each assigned IP address (the period of time the IP address assigned will be valid),
DNS IP address and the gateway IP address. These details are sent to the DHCP client
(i.e. your PC) when it requests an IP address from the DHCP server. Click Apply to
enable this function. If you check “ Use Router as a DNS Server ”, the ADSL Router
will perform the domain name lookup, find the IP address from the outside network
automatically and forward it back to the requesting PC in the LAN (your Local Area
Network).