Atlantis Land Web Share 3G 244WN Page 62 User Manual Download

Page: 62 / 133

WAN CONNECTION – 3G MODE

In the ADSL mode, as the ADSL is not available(failover/failback), it will turn to 3G

mode for supporting WAN Connection. However, in the 3G Mode, the ADSL can not

support WAN Connection when 3G Mode is unavailable.

You have to pay particular attention to the WAN-ADSL connection. If you

have any doubt turn to qualified personnel or contact Atlantis-Land

technical assistance.

Atlantis Land will not be considered responsible in case of

wrong or bad configuration.

3G USB Modem is not included with WebShare 244WN.

WebShare 3G 244WN can works only with a compatible device.

Please check the modem compatibility on the website

www.atlantis-

land.com

or with the compatibility list provided with the WebShare

244WN.

7.2.2

WAN Profile

If the function Failover/Failback is Enable, is necessary to set both

interfaces using Wan Profile menu.

You have to pay particular attention to the WAN-ADSL connection. If you

have any doubt turn to qualified personnel or contact Atlantis-Land

technical assistance.

Atlantis Land will not be considered responsible in case of

wrong or bad configuration.

3G USB Modem is not included with WebShare 244WN.

WebShare 3G 244WN can works only with a compatible device.

Summary of Contents for Web Share 3G 244WN






































































































































Search results

Summary of Contents for Web Share 3G 244WN

Reviews:

Related manuals for Web Share 3G 244WN

Brands by name

Popular brands

Atlantis Land Web Share 3G 244WN, User Manual

Search results

Summary of Contents for Web Share 3G 244WN

Reviews:

Related manuals for Web Share 3G 244WN

Brands by name

Popular brands