Atlantis Land NetCamera NVW A02-IPCAM4-W54, Manual

Page: 38 / 85

NetCamera NVW
A02-IPCAM4-W54 39
bandwidth utilization. Additionally, the Access Point enables
users on a wireless LAN to access an existing wired network,
allowing wireless users to take advantage of the wired
networks resources, such as Internet, email, file transfer, and
printer sharing. The scale and range of the Infrastructure
networking are larger and wider than that of the Ad-hoc
networking.
The range of radio frequencies used by IEEE 802.11g wireless
devices is called a “channel”. Channels available depend on
your geographical area. You may have a choice of channels
(for your region) so you should use a different channel than an
adjacent AP (access point) to reduce interference. Interference
occurs when radio signals from different access points overlap
causing interference and degrading performance.
Adjacent channels partially overlap however. To avoid
interference due to overlap, your AP should be on a channel at
least five channels away from a channel that an adjacent AP is
using. For example, if your region has 11 channels and an
adjacent AP is using channel 1, then you need to select a
channel between 6 or 11.
For some European Country, it may have its own domain;
users are responsible for ensuring that the channel set
configuration is in compliance with the regulatory standards of
these countries.
You can check under System-Status the status/quality of
wireless Link.