Atlantis Land NetCamera NVW A02-IPCAM4-W54, Manual

Page: 54 / 85

NetCamera NVW
A02-IPCAM4-W54 55
APPENDIX A: Frequently Asked Questions
A.1 Using LEDs to Diagnose Problems
The LEDs are useful aides for finding possible problem causes.
A.1.1 LED Power
The PWR LED on the front panel does not light up.
Steps CORRECTIVE ACTION
1
Make sure that the NetCamera NVW’s power adaptor is
connected to the Access Point and plugged in to an
appropriate power source. Use only the supplied power
adaptor.
2
Check that the NetCamera NVW and the power source are
both turned on and the NetCamera NVW is receiving sufficient
power.
3
If the error persists, you may have a hardware problem. In this
case, you should contact Atlantis Land SpA.
A.1.2 LED LAN
The LAN LED on the front panel does not light up.
Steps CORRECTIVE ACTION
1
Check the Ethernet cable connections between the
NetCamera NVW and the computer or hub.
2 Check for faulty Ethernet cables.
3
Make sure your computer’s Ethernet card is working properly.
4
If these steps fail to correct the problem, contact Atlantis Land
SpA for assistance.