20
5/ Installing the control unit
To correctly control the heating, the thermostat must measure an ambient temperature that is the most re-
presentative of your house. As the temperature probe is in the transmitter's unit, you must place the unit:
- in the bathroom,
- fixed on a wall placed on a shelf or a piece of furniture, that can be accessed by someone measuring
1.50m,
- away from sources of heat (fireplace, direct sunlight) and draughts (window, door),
IMPORTANT:
Do not install the thermostat on an outside wall or in an unheated room (e.g. garage, etc.).
fixed
on the wall
about 1.50 m
off the ground
placed on
a piece of furniture
20 cm min.
Location
Fixing
Raise the cover with a screwdriver.
Using the screwdriver, remove the batteries delivered with the device (if fixed to the
wall) or remove the battery protection tab (if fixed on stand).
Fixed to the wall
Fix the thermostat using screws and plugs or onto a wall box (
➊
, centre-
to-centre distance = 60 mm).
Put the batteries back in place, the right way round.
Fixed on a stand
Using the stand supplied, you can place
the transmitter on a piece of furniture (see Location paragraph).
