16
Installation
1/ Preparing to install the heated towel rail
Location of the device
- This device was designed to be installed in residential premises. In any other case, please call your
distributor.
- Installation must comply with the standards currently enforced in the country of use.
- Locate the heater within minimum distances from obstacles.
Do not install the device :
•
In a draft likely to affect its control (
under
centralised mechanical ventilation, etc…
).
•
Under a fixed mains outlet.
•
Inside zones 0 and 1 in bathrooms.
The device has to be installed so that
switches and other controls cannot be tou-
ched by a person in the bath or shower, ex-
cept in the UK where IEE Regulations
701.512.2 and 701.512.3 apply. These allow
the use of IP24 rated products and their in-
tegral controls in Zone 2 and ouside zones.
OK
KO
