23
PREPARING FOR INSTALLATION OF THE APPLIANCE
1 - Installing the appliance
Your appliance is delivered with its own hanging bracket. However,
the choice of screws and of wall plugs depends on the nature of
your wall and you are responsible for ensuring that you use screws
and wall plugs that are adapted to the weight of the appliance.
Once the you have removed the appliance from its cardboard box,
you can remove the hanging bracket, which you can use as a hole
drilling template.
2 - Installation rules
This appliance has been designed to be installed in a residential
room.
The installation must be carried out implementing best practices
and in accordance with the current standards in the country of
installation (NF C 15-100 for France).
Observe the minimum distances from furniture when locating the
appliance (refer to the diagram).
If you have a foam-mounted wall covering then a wedge that is the
same thickness as the foam must be placed under the appliance's
bracket so that an open space is maintained behind the appliance
to prevent any interference with its regulation function.
- Do not install the appliance in a draught that is likely to interfere
with its regulation function (under a Centralised Mechanical
Ventilation system, etc), or
- Under a fixed electric socket, or
- In bathroom areas shown as Volume 1.
Appliances used in bathrooms must be installed so that the switches
and other devices for controlling the appliance cannot be touched
by an individual in the bath or the shower.
15
15
12
50
50
Dimensions in cm
12
60 cm
60 cm
3 m
Volume
1
Volume
2
60 cm
2,25
m
Volume
0
Summary of Contents for SOKIO
Page 32: ...32 The menu in BASIC mode ...
Page 33: ...33 The menu in PROG mode ...
Page 39: ...39 ...
