50
6.2 - Occupation
(not available in the Plinth version)
This allows you to heat your room only when
a person is present. The appliance will then
heat in Comfort mode.
To optimise the occupation detection of your
appliance, it is best to install it in such a way
that the detection is optimal (e.g. Do not install
it next to a sofa, a well-used passageway such
as a corridor, a piece of furniture, ...).
6.2.1 - Activating/Deactivating the function
Function always activated in AUTO mode
E.g. Your appliance is set at 19°C in Comfort (programmed or not).
- 09:00, it detects your presence;
- 09:30, the operating temperature switches to 18°C;
- 10:00, the operating temperature switches to 17°C.
There is no detection below the sensor.
