52
Settings
Restrictions
Max.
temperature
This is used to save a maximum setpoint temperature that
cannot be exceeded. By default, it is set to 28°C and can be
changed (between 19°C and 28°C).
Access control
This is used to partially or totally restrict the appliance"s
settings.
PIN
This is used to save a personal access code for the Expert
mode menu. Once activated, the Expert mode menu access
is coded.
You can note your
personal code here
To deactivate it, go back to the Expert mode menu,
enter your personal code and go back to Parameters -->
Restrictions--> PIN
Connectivities
Send the security
key
The security key keeps your
iO
installation secure, so
that it does not interfere with a neighbour"s equipment.
Exchanging the key makes it possible to associate an
iO
control point with your installation.
This is used to send the security key to an
iO
control point.
Give priority to this operation if the appliances are
paired.
Receive the
security key
This is used to receive the security key from an
iO
control
point.
It prevents the existing pairing from functioning if the
security key is not transmitted to the other paired appliances.
Authorise
Association
After the key exchange, this operation is necessary to allow
association with an external
iO
control point from our brand.
Reset
Connectivities
Deletes all connectivities (appliance pairing, connection to
the application, connection to a centralised control point).
Test
Main element This switches on the heating element for 5 minutes in order to check that it is
working correctly.
Presence
sensor
This activates the sensor in order to check that it is working correctly.
Radio
Test signal
transmission
This is use to check that there is good radio communication
between two appliances by sending a signal from one
appliance and receiving the signal on another. If the signal
is weak, there is a risk of losing communication. Check
the installation (distance and/or obstacles between the
appliances).
Test signal
reception
To exit the Expert mode menu:
+
5 seconds
Press
simultaneously
or
Wait for
2 minutes
