background image

THE GUARANTEE ON THE ATLANTIC MULTI ELEC

This guarantee is to the purchaser of the boiler(s) who is deemed to be the installer. If the
boiler(s) is (are) purchased by the eventual user who then arranges to install the boiler(s),
the eventual user is deemed to be the installer. The details of the guarantee are given to
assist the installer in obtaining effective action within the guarantee and they are in
addition to the installer’s legal rights under the relevant statutory enactments for the time
being in force in England, Wales, and Scotland.
Electrical equipment:
The replacement or repair of the item, including the cost of its delivery to the site of the
installation or its equal within England, Wales and Scotland, provided that the defect or
flaw occurs within 1 calendar year of the commissioning date.
Removable component of the boiler assembly (other than the electrical equipment)
The replacement or repair of the item, including the cost of its delivery to the site of the
installation or its equal within England Wales and Scotland if the defect or flaw occurs
within 1 calendar year of the commissioning date.
The main body of the boiler.
The repair of any welding defects in the main body of the water heater including any
necessary removal or replacement of that part of the water heater on site if the defect
occurs within 3 calendar years of the commissioning date.
Definitions:
The effective actions stipulated in this guarantee are subject to the purchaser complying
completely with the following:

1) The boilers are installed according to the recommendations of this technical

booklet, the recommended codes of practice of the C.I.B.S.E and the B.S.I., and
the checklist on page 13 is satisfied.

2) The commissioning of the boilers by ACM Atlantic and their regular annual

servicing and maintenance.

3) The payment in full, by the purchaser unless otherwise agreed, of the invoice for

the supply and delivery of the boiler(s) to site, any other relevant invoices
connected with the boiler positioning and fixing, and the invoices for
commissioning and any correction of installation error, all to be made within one
calendar month of the date of the invoice.

4) The presentation, at the time of a claim under the guarantee, of the boiler

registration number, the commissioning record with date, and the necessary
information for defining any replacement part.

5) When a replacement item is supplied for a defective item, the defective item must

be returned to ACM Atlantic at their registered office within 6 weeks of the date
of notification of the defect carefully labeled with registration number of the
boiler and the name and the order reference of the purchaser of the boiler. If this
is not complied with, the purchaser will be charged with the cost of the item and
its delivery.

Summary of Contents for MULTI ELEC





















Reviews: