Atlantic MULTI ELEC, Technical Manual

Page: 17 / 20

STARTING THE BOILER

Remove the power fuses

Check that the boiler is filled with water

Check that the immersion heaters are sound
. If isolation is below 2MΏ, please
find the reason and remdy it.

Turn the power on using the main switch and the key switch

Check that the circulation pump is running.

Check that there is a lockout if the circulations pump stops

Adjust the temperature settings

Stop the boiler using the main switch

Put the power fuse in

Switch the boiler back on

Check the immersion heaters electrically for faults. Tight all the connections up
after one week of operation

If the boiler is powered without any water, it will cause the immersion heaters or
sensors to fail (no warranty)