32
2.4 - On / Off switch
An on/off switch is located on the back of the device. Only use
this switch for prolonged shutdown (outside heating periods). Make
sure the switch is on I (On).
After a prolonged shutdown, resetting the date and
time may be required.
2.5 - Start-up
When first powered on, follow the instructions displayed on the
screen.
2.5.1 - Set the language
Change the language with
+
and validate with
.
You can later access the Language setting through the Expert Menu
(see "Expert Menu" section).
2.5.2 - Set the date and time
Change the date with
+
and validate with
. Proceed in the
same way to set the month, year, hour, minute.
You will be able to access the date and time setting later.
The Daylight saving time (DST) is automatically set by default.
You can disable the default Daylight saving time DST (see "Expert
menu"section).
2.5.3 - Device status
When first powered on,
y
AUTO mode is selected (see "Operating Modes"
section)
y
The set temperature is 19°C,
y
Open window and occupation detection
functions are enabled (see "Detections Functions"
section")
y
The maximum temperature reduction (during
absences) from the set temperature is 3°C..
