Atlantic Ultraviolet Sanidyne PREMIUM Owner'S Manual Download Page 4

4

SAFETY LABELS 

Danger Label: Ultraviolet Radiation (70-0052)

DANGER

!

UV

Ultraviolet

Radiation

Protect eyes and

skin from direct and

reflected radiation.

Part No. 00-0358

Danger: UV 5”x5”  PMS109, PMS185/ out dr & Bk White Mylar UV Varnish

00-0358

Danger Label: Ultraviolet Radiation (00-0358)

Danger Label: Hazardous Voltage / 

 

Ultraviolet Radiation (70-0036)

CAUTION 

It is the user’s responsibility to determine and validate the suitability of this equipment for use in the user’s system or 

process. No warranty or representation is made by the manufacturer with respect to suitability or performance of this 

equipment or to the results that may be expected from its use. The user should periodically inspect, clean as necessary and 

confirm the presence and good legibility of the product safety labels. Contact the factory for replacement labels in the event 

that any of the labels are missing or illegible.

Location of Danger Labels (70-0036, 

70-0037, and 70-0011) on Back of Unit

Location of Danger Labels (70-0052) on Top of Unit

Location of Danger Labels (00-0358) on Both Sides of Unit

Hg-Lamp Contains Mercury Label (70-0011)

Warning Germicidal UV Label (70-0037)

Summary of Contents for Sanidyne PREMIUM





















Reviews: