Atlanta ATH-592, Instruction Manual, Page: 11 / 48

11
INSTRUCTION MANUAL
- do not cover the appliance;
- do not plug or unplug the appliance with wet hands;
- do not plug the appliance if there is water on the surface;
- do not allow the plug to overheat; make sure the appliance is properly plugged;
- do not use the multi cooker if the supply cord is damaged or wet;
- switch off and unplug the appliance before cleaning and let the loose parts cool down;
- never pull the power supply cord to unplug the appliance; grasp the plug and pull
to disconnect instead;
-
store the appliance in a cool dry place.
• The multi cooker is intended for home use only.
• If the appliance is damaged during the use, disconnect it from the power supply
immediately. Never attempt to repair the appliance yourself; take it to the nearest
Authorized Service Centre and show your warranty ticket.
CLEANING AND HANDLING
• Cooking bowl, steamer bowl, overfill preventing lid and thermal screen need to
be cleaned after each use.
• Switch off the multi cooker, unplug it, and then wash the bowls and overfill
preventing lid in warm soapy water and wipe thermal screen.
• Do not clean the bowls with chemically active liquids or abrasive washing agents,
as they can damage the non-stick coating.
• Wipe the multi cooker case and the heating element active area with a soft damp
cloth, without pressing the thermal sensor.
• Do not clean the multi cooker with the help of other tools.
• Never immerse the whole multi cooker in water or other liquid.
• Having cleaned all parts of the appliance, let them completely dry out, and then
the appliance can be assembled and used again.
TYPICAL DEFECTS AND MEASURES FOR THEIR ELIMINATION
Defect Possible reason Elimination methods
Control panel indicator does
not light up, the operational
surface of the heating
element does not warm up 1. No electricity supply Check is the appliance is
plugged
2. Control panel is damaged Take the appliance to the
Authorized Service Centre
Indicator lights up, the
operational surface of the
heating element does not
warm up 1. Heating element is
damaged
2. Control panel is damaged Take the appliance to the
Authorized Service Centre