33
| Auto Wash 365 Manual | v1.1
Editing Programs Continued
Pressing the Info key
allows the user to edit which outputs are ON during each step - the same
functionality as the I/O
PCB test list. The outputs available are:
Pressing the Stop key
shows the maximum step time and controls what happens when this time
is completed.
Innovation In and Out of Parlour
©
A
TL
A
g
ricu
ltu
ra
l
Te
ch
n
olog
y
L
imite
d:
Ju
n
e
2
0
1
9
s01 t1 00--06--00.0
Step will run for 6
minutes and then go
onto next step
HH - hours
SS - seconds
MM - minutes
T - tenths of seconds
s01 pump1 2.000L
Pump 1 delivers 2.00
litres of chemical and
then go onto next step
Pump Number - 1, 2, 3 or 4
s01 wt ) 60°C
Step will complete
when wash trough
temperature is
greater than 60°C
Can be less than (<) or greater than (>) X temperature
s01 wtL ) 105cm
Step will complete
when wash trough
level is greater than
105cm
Can be less than (<) or greater than (>) X cm
Info
Clear
Hot Water 1
Cold Water
Drain
Diverter
Vac Pump 1
Vac Pump 2
Vac Pump Stop
Milk Pump 1
Air Blast
Pulsation
Auto Drain
Output 1
Wash Trough Lock
Milk Tank Lock
Peristaltic Pump 1
Peristaltic Pump 2
Peristaltic Pump 3
Peristaltic Pump 4
maX C 00--10--00.0
Stop
Reset
Stop
Reset
C = continue to next step
S = stop program and warn user
HH - hours
SS - seconds
MM - minutes
T - tenths of seconds
