17
| Auto Wash 365 Manual | v1.1
Innovation In and Out of Parlour
©
A
TL
A
g
ricu
ltu
ra
l
Te
ch
n
olog
y
L
imite
d:
Ju
n
e
2
0
1
9
Setting up the Auto Wash 365
Before it can be used, the Auto Wash 365 must be setup. This is outlined in the following pages.
The Keypad
There are 11 keys on the keypad. 4 are for washing programs - Pre-Milking, Prog 1, Prog 2 and Prog 3 - the
Milk key is for milking mode, the Info key provides information on the wash, and the remaining keys are
Stop, Enter, Shift, Up and Down.
There a number of keys that are dual function with the use of the Shift key - these provide the programming
and user functions when a wash program is running. The other function of the key is shown in the grey box at
the top of the key. The keys which have dual function are Milk, Prog 1, Prog 2, Prog 3, Pre-Milking, Info, Stop
and Setup.
The keypad is constructed from a tough membrane overlaying individual key switches. This is a proven,
reliable construction which will last for many years provided it is cleaned only with warm soapy water and not
hosed down at high pressure.
The Display
The display has two areas. The Mode area shows the current mode - either Idle when neither milking or
washing, Milk when in Milking Mode or PRE, PG1, PG2 or PG3 when in Washing Mode. The Function area
shows where the control is in Wash Mode or displays the time in Milking or Idle Modes.
The Auto Wash 365 Control is very energy efficient; power saving was an important element of the design
criteria. If a key is not pressed for 30 minutes, the display will shut down but can be re-illuminated by
pressing any key.
IDLe 15--48--44
Mode
Function Window
Prog 1
Milk
Shift
Insert
Delete
Prog 2
Prog 3
Enter
Setup
Info
Stop
Reset
Skip
Pause
Pre
Milking
Clear
Back
