26
ATIM_ACW-TMxP_UG_EN_V1.0
For each error message, a header is inserted and is formed as follows:
The
message index
field is used to prioritize messages when several errors occur.
The
length of the error message
field indicates the size in bytes of the error message.
The following byte identifies the nature of the error that occurred:
Error frame header
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
Message index
Length of the error frame
Error code
Nature of the error
Description
0x81
ERR_UNKNOWN
0x82
ERR_BUF_SMALLER
The data table is full, impossible to write any additional data
0x83
ERR_DEPTH_HISTORIC_OUT_OF_RAN
GE
The history depth is too large or too small for the frame
0x84
ERR_NB_SAMPLE_OUT_OF_RANGE
The number of sampling is too large or too small for the frame
0x85
ERR_NWAY_OUT_OF_RANGE
The number of the channel in the header of the frame is too large or too
small
0x86
ERR_TYPEWAY_OUT_OF_RANGE
The type of measurement in the frame header is too large or too small
0x87
ERR_SAMPLING_PERIOD
Bad structure of sampling period
0x88
ERR_SUBTASK_END
End of a sub-task after leaving an infinite loop
0x89
ERR_NULL_POINTER
Pointer with value
“NULL”
0x8A
ERR_BATTERY_LEVEL_DEAD
Critical battery level
0x8B
ERR_EEPROM
EEPROM is corrupted
0x8C
ERR_ROM
ROM is corrupted
0x8D
ERR_RAM
RAM is corrupted
0x8E
ERR_ARM_INIT_FAIL
Radio module initialization has failed
0x8F
ERR_ARM_BUSY
The module is already busy (possibly not initialized)
0x90
ERR_ARM_BRIDGE_ENABLE
The module is in bridge mode, cannot send data by radio
0x91
ERR_RADIO_QUEUE_FULL
Radio queue is full
0x92
ERR_CFG_BOX_INIT_FAIL
Error during black box initialization
0x93
ERR_KEEP_ALIVE_PERIOD
Wrong keep alive frame structure
0x94
ERR_ENTER_DEEP_SLEEP
The device entered deep sleep mode
0x95
ERR_BATTERY_LEVEL_LOW
Low battery
0x96
ERR_ARM_TRANSMISSION
A transmission has been initiated but an error has occurred
0x97
ERR_ARM_PAYLOAD_BIGGER
Message size is too large for the capacity of the network
0x98
ERR_RADIO_PAIRING_TIMEOUT
Impossibility to pair to a network within the fixed period
0x99
ERR_SENSORS_TIMEOUT
A timeout has been reached out on the sensor
0x9A
ERR_SENSOR_STOP
The sensor did not report a value after reading
