15
Description of the device /
Spare parts
Pos. Designation
Spare part no.
1
Handle
2
On/Off switch
3
Cord grip
4
Cable clip
381273
5
Connector
6
Hook for collecting bag
7
Blow hose
381264
8
Mains plug
9
Operating bar
381265
10 Collecting bag
381266
11 Extension blow tube
381267
12 Carrying handle
13 Motor
14 Turning knob for height adjustment
15 Blow nozzle
16 Holder
17 Suction funnel
18 Small wheel
381268
19 Hubcap (small wheel)
381269
20 Large wheel
381270
21 Hubcap (large wheel)
381271
22 Safety label
381272
Ordering spare parts:
−
Available from the manufacturer or dealer
−
Orders must quote the following information:
•
Colour of the machine
•
Spare parts no.
•
Description/designation of the part
•
Quantity required
•
Model no. of the vacuum cleanerl
Example: orange, 381266, collecting bag, 1, KLS 1600
Assembly
Please observe the enclosed assembling
instructions!
Connect the leaf sucker to the power supply system
only after having finished the complete assembly.
Mount the operating bar (9).
Mount the handle (1).
Fix the cable on the operating bar (9) using the cable
clip (4).
Slip the collecting bag (10) on.
Turn the handle of the collecting bag clockwisely to
secure the collecting bag.
Hang up the collecting bag.
Plug the connector of the blow hose (7) in the suction
funnel (17)
Hang up the blow hose (7).
Put the extension blow tubes (11) in their receivers on
the machine to properly keep them.
Start-up
Check that the machine is completely and correctly
assembled.
Before using the shredder, make sure each time that
−
the supply / extension cable for damages (cracks, cuts or
the like) or ageing (brittleness).
Do not use defective supply or extension cables.
−
there are no damage at the machine
−
all screws are tight
−
the collecting bag shows no signs of wearing or quality
deterioration
Mains connection
Compare the voltage given on the machine model plate e.g.
230 V with the mains voltage and connect the machine to the
relevant and properly earthed plug.
Connect the machine via a 30 mA fault current safety switch.
Do not use any defective connection cables.
Use connecting or extension cables up to a length of 1.5 m
featuring a core cross section of at least 25 mm²
Fuse protection: 10 A
Mounting of the extension cable
1.
Plug the female connector of the extension cable on the male
connector of the device.
2.
Thread the extension cable through the pull relief device (3)
as a loop and hang it up.
3.
Make sure that the extension cable has enough free motion.
Switching on/off
Do not use any device where the switch can not be switched
on and off. Damaged switches must be repaired or replaced
immediately by the customer service.
The ON/Off switch (2) is integrated in the handle (1).
Switching on:
Put the On/Off switch (2) to
.
Switching off:
Put the On/Off switch (2) to
.
In the case of a power failure the machine does not
automatically put the switch to
. Put the On/Off switch
immediately to
to prevent any accidental starting of the
machine when the power supply recovers.
Working with the garden vac
Before starting any work read and understand
the safety notes,
following additional instructions on how to work
with this machine.
Note the following before switching on the unit:
The machine may only be operated by persons over the age
of 16 years, and who have read and understood these
operating instructions.
Wear your safety gear (goggles/vizor, gloves, long trouseres,
non-slip shoes, hainet in case of long hair) for protection from
possible injuries.
Summary of Contents for KLS 1600 -
Page 171: ......
