ATIKA KGSZ 255, Operating Manual

Page: 19 / 167

18
Contents
Declaration of conformity 6
Extent of delivery 18
Characteristics noise values 18
Symbols machine /operating instructions 18
Normal intended use 18
Residual risks 19
Security instructions 19
Description 21
Preparing for commissioning
21
Commissioning 21
Adjusting the saw
22
Working with the saw 23
Maintenance and cleaning 24
Transport 25
Storage 25
Guarantee 25
Possible faults
25
Technical data 26
Spare parts 27
Extent of delivery
•
Pull, crosscut and mitre saw KGSZ 255 (preassembled unit)
•
2 support arms
•
1 vice assembly
•
1 dust bag
•
1 set carbon brushes
•
Tool
•
Operating manual
After unpacking, check the contents of the box
>
That it is complete
>
Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Characteristic noise values
DIN EN ISO 3746 / DIN EN ISO 11202 / ISO 7960 Appendix A
Use of machine as crosscut and mitre saw with standard saw
blade.
Noise power level Sound pressure level at the
workplace
No-load
L
WA
= 99dB(A) L
PA
= 86 dB(A)
Load
L
WA
= 104,4 dB(A) L
PA
= 91,4 dB(A)
The factor of measurement uncertainty is 4 dB.
The values given are emission values and must therefore not simulta-
neously represent safe workplace values too. Although there is a
relationship between emission and immersion levels, it can be reliably
deduced whether additional precautionary measures are necessary or
not. Factors, which can influence the immersion level currently existing
at the workplace include the duration of the effects, the special type of
the workroom, other noise sources, etc. e.g. the number of machines
and other adjacent processes. The permissible workplace values can
also vary from country to country. This information should however
enable an improved assessment of the danger and risk to be carried
out.
Symbols machine
Carefully read
operator’s man-
ual before han-
dling the ma-
chine. Observe
instructions and
safety rules when
operating. Shut off engine
and remove
power cord be-
fore performing
cleaning, mainte-
nance or repair
work.
Attention – Laser
radiation. Do not
look into the
beam.
Risk of injuries of
fingers and
hands by the saw
blade Do not expose to
rain. Protect
against humidity.
Wear eye and
ear protection Wear dust mask.
Symbols Operating instructions
Threatened hazard or hazardous situation. Not ob-
serving this instruction can lead to injuries or cause
damage to property.
L Important information on proper handling. Not ob-
serving this instruction can lead to faults in the machine.
User information. This information helps you to use all
the functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Normal intended use
ƒ
The device is suitable to cut wood and other wood-type
materials (e.g. particle boards) in the house and hobby field.
ƒ
The device is suitable for crosscuts, inclined cuts, mitre cuts
and double mitre cuts.
ƒ
The cutting of round material and irregularly shaped mate-
rials (rickers, poles, fire wood etc.) is not permitted since
these work pieces cannot be held securely.
ƒ
Only work pieces that can be put down securely and held
with clamping devices may be processed.
ƒ
The use of saw blades made of HSS steel (high-alloy high
speed steel) is not permitted since this steel is hard and
brittle. Risk of injury through saw blade breakage and expul-
sion of saw blade pieces.