ENG - Manual of installation, use and maintenance.
210-0352_libretto_WHC_ATI_eng.docx
22
Jan-19
MENU PARAMETERS SCREEN
Password entry
By pressing simultaneously the buttons
and
from the main screen (or even from
the “
off
”
screen), you access the
password entry screen for the parameters menu. The system has two different passwords:
one to access the parameters menu 01 "Installer" (default = "00"), for the user and installer;
one to access the parameters menu 02 "Settings" (default = "05"), reserved to the installer;
The followings will be shown on the display: in the upper part, a two-digit password to be entered, at the bottom the word
"PASS" and in the middle the
symbol. By pressing
of
the most significant digit of the password will be increased,
by pressing
of
it will be decreased; by pressing
of
the least significant digit of the password will be
increased, by pressing
of
it will be decreased. Press the
button to confirm the code: at this stage, if the password
is correct, you will enter the specific parameters menu, otherwise, after the displaying of the symbol "- -", you will return to the
main screen. Just press the
button to exit the password menu: the symbol "- -" is displayed for one second, after which you
return to the main screen. If you stay in the password menu for ten consecutive minutes without pressing any key, the system
returns to the main screen.
PARAMETERS MENU
The display of each parameters menu (installer menu, settings menu, factory menu) is the same: the current parameter value is
displayed in the upper part, the index parameter at the bottom, in the middle the
symbol if you display the "Installer"
menu, the
symbol if the "Settings" or "Factory" menu is displayed. You can scroll cyclically all the menu parameters by
pressing the buttons
of
(index increase) or
(index decrease); you can advance rapidly in the index by
keeping these keys pressed. Once the desired parameter is identified (refer to the following tables), it is possible to change the
value by pressing the keys
of
(value increase) or
of
(value decrease); in this case too, it is possible to change
quickly the values by holding the button pressed. Press the
button to save the newly modified parameter value: the
message "MEMO" will be displayed and this will confirm the data saving. It is important to note that this operation will save only
the value of the parameter currently displayed on the screen. In order to save multiple parameters, it is necessary to change the
value parameter by parameter, and then press the
button. To exit any of the parameters menu, simply press the
button: the symbol "- -" is displayed for one second and then you return to the main menu. If you stay in a parameter menu for
ten consecutive minutes without pressing any key, the system returns to the main menu.
TO THIS REGARD, IT IS VERY IMPORTANT TO NOTE THAT IF YOU EXIT A MENU PARAMETERS WITHOUT HAVING RECORDED THE
NEW VALUES, ALL THE CHANGES WILL BE LOST AND THE PARAMETERS WILL RETURN TO THE VALUE SET BEFORE THE
MODIFICATION.
