INSTRUCTIONS FOR THE USER
210-0184_Libretto_SX-080-120_ATI_2019-04_ENG.docx
22
ed. 2019-05
27.
CORRECT DISPOSAL OF THIS PRODUCT
PRODUCT IN COMPLIANCE WITH EU DIRECTIVE 2012/19 / EU-D.Lgs.49 / 2014 pursuant to art. 26 of
Legislative Decree 14 March 2014, n. 49 "Implementation of Directive 2012/19 / EU Waste
Electrical and Electronic Equipment (WEEE)" (Applicable in the European Union countries and
countries with separate collection systems)
The marking on the product or its literature indicates that the product should NOT be disposed of
with other household waste at the end of the life cycle. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, the user is encouraged to
separate this from other types of wastes and recycle it responsibly to promote the sustainable
reuse of material resources. Household users should contact either the retailer where you
purchased the product or their local government office, for details on separate collection and
recycling for this type of product. Business users should contact their supplier and check the terms
and conditions of the purchase agreement.
.
28.
FREQUENT QUESTIONS
1.
You can use a cleanser (adddolcitore, water softener, etc.)?
The use of the purifier reduces the protective effect of
magnesium anode and consequently the duration of life of the boiler. The manufacturer recommends not soften the
water to a hardness of less than 10 ° F
2.
What is an anode and what is it?
The magnesium anode protects the appliance from corrosion due to electric currents
present in the water. The anode, consumed, avoids that these consume electrical current, discharging to the tank, the
material of which is composed of the inside of the tank (the enamel), ensuring a longer life of the tank itself. In order to
extend the life of the latter, the anode is to be replaced every year.
3.
Inside the boiler feel the blows: What are they?
Excessive formation of limestone (calcium) in the tank can cause some
shots audible outside the boiler itself. The amount of limestone that is formed inside the tank may depend on several
factors: firstly, the quality of the water distributed in the network, which can have many high hardness values. In addition
a high temperature of hot water storage (the temperature set on the thermostat) accelerates the formation of limestone.
Since the formation of scale is an inevitable phenomenon, we recommend doing a proper maintenance check and clean
the inside of the tank at least once a year by an authorized service center, using the special flange from the tank itself.
