ATI Technologies FireGL X3-256, User Manual

Page: 22 / 54

16 Installing Drivers and Software in Windows®
Your operating system must be installed and running before you can install
the FireGL™ drivers. You must also have Service Pack 1 (or higher) for
Windows® 2000 or Windows® XP installed.
Make sure your monitor cable is properly attached before you begin.
Note: The installation dialog will display in English if your operating
system’s language is not supported.
To install ATI drivers and software
1
Start your system. When the Found New Hardware Wizard
comes up, click Cancel . When the System Settings Change
window asks you to restart your computer, click No .
2
Run the ATISETUP utility. The ATISETUP utility will start
automatically if you insert the ATI Installation CD-ROM into your
CD-ROM drive after the operating system has started. If your CD-
ROM auto-run is not enabled or the
ATISETUP
utility does not start
automatically:
a) Click the Start button in the task bar.
b) Click Run .
c) Select ATISETUP.EXE from the root directory of the ATI
Installation CD-ROM.
d) Click OK .
3
Click Install under Software Install.
4
Click
Next
.
5
Click
Yes
to the license agreement. ATI Easy Install will start the
Installation Wizard.
6
Follow the wizard’s on-screen instructions to complete the
installation.
Note: The Express installation option is recommended. The
HYDRAVISION™ multi-monitor and desktop management software
will automatically be installed, along with the ATI driver, by selecting
this option. Not all software components are installed using the
Express installation. Custom installation allows you to select
individual software components for installation.
7
When the Setup complete message appears, select Yes, I want to
restart my computer now and click Finish .