Getting Started 7
Quick Installation
• Brief instructions on how to get to work with the FireGL card
in the shortest possible time.
• Recommended for experienced users and system
administrators only.
• For more detailed information on installation and operation
of your graphics accelerator, please refer to Chapter 2 and
Chapter 3.
Installation Steps
1
Un-install the drivers and software for your old graphics
card.
2
Disable any on-board graphics solution on the
motherboard.
3
Shut down and disconnect your computer system.
4
Remove the installed (AGP or PCI) VGA card.
5
Install the new FireGL card.
6
Reassemble and connect your computer system.
7
Install the FireGL drivers and configuration software from
the ATI INSTALLATION CD-ROM:
- automatic
ATISETUP
utility or
-
Start > Run > X:\ATISETUP.EXE
where X is the drive letter of your CD-ROM drive
