manualshive.com logo in svg

ATI Technologies 9150-CRT, Product Manual, Page: 30 / 31

Share
Download
ATI Technologies 9150-CRT Product Manual Download Page 30

Manual, Compliant Reciprocating Tool, CRT Series
Document #9610-50-1028-04

Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 • www.ati‑ia.com

30

9.3  Interface Plate

 

3rd ANGLE PROJECTION

2X M5 SHCS FOR  CLAMPING COLLAR TORQUE TO 52 in-lb (5.9 Nm) APPLY LOCTITE 242 OR  EQUIVALENT NOTE 1

9150-CRT-12-5 (-E)

9005-50-6143

CRT-12-5 WITH 9005-50-6143 AXIAL OFFSET PLATE

295

APPROX.

 125 

 3X R62.5 

 

12 THRU 

 100 

 53 

CUSTOMER TO MACHINE

ROBOT MOUNTING PATTERN

AS DESIRED.

CRT-12-5 HIDDEN FOR CLARITY

 16 

 38 

 215.5 

KEEP THIS AREA  CLEAR FOR UTILITIES

NOTES:

INCLUDED WITH 9005-50-6143

1.

REV.

DESCRIPTION

INITIATOR

DATE

01

INITIAL DRAWING

DJB

12/23/2019

B

1:2

1

1

REVISION

NOTES:  UNLESS OTHERWISE  SPECIFIED.

DO NOT SCALE DRAWING.   ALL DIMENSIONS ARE IN  MILLIMETERS.

DRAWN BY:

CHECKED BY:

D. Bohle 12/23/2019

G. Wu 1/7/2020

TITLE

SCALE

SIZE

DRAWING NUMBER

PROJECT #

SHEET       OF 

9230-50-1090

190916-3

01

PROPERTY OF ATI INDUSTRIAL AUTOMATION, INC. NOT TO BE REPRODUCE

D IN ANY 

MANNER EXCEPT ON ORDER OR WITH PRIOR WRITTEN AUTHORIZATION OF A

TI.

 

Axial Air Supply Interface Plate, 100mm Offset, CRT-12-5

1031 Goodworth Drive, Apex, NC 27539, USA Tel: +1.919.772.0115       www.ati-ia.com Fax: +1.919.772.8259      ISO 9001 Registered Company

Summary of Contents for 9150-CRT
































Reviews:

No comments