manualshive.com logo in svg

ATI Technologies 9150-CRT, Product Manual, Page: 28 / 31

Share
Download
ATI Technologies 9150-CRT Product Manual Download Page 28

Manual, Compliant Reciprocating Tool, CRT Series
Document #9610-50-1028-04

Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 • www.ati‑ia.com

28

 

3rd ANGLE PROJECTION

9150-CRT-12-5

10

17

21

29

25

28

32

30

36

34

35

6

14

REPLACEMENT FILES

ATI PART NUMBER

DESCRIPTION

3710-50-1459

FILE, RECTANGULAR, 5MM

3710-50-1460

FILE, ROUND, 5MM 

3710-50-1461

FILE, HALF ROUND, 5MM

3710-50-1462

FILE, TRIANGULAR, 5MM

B

1:2

2

2

REVISION

NOTES:  UNLESS OTHERWISE  SPECIFIED.

DO NOT SCALE DRAWING.   ALL DIMENSIONS ARE IN  MILLIMETERS.

DRAWN BY:

CHECKED BY:

D. Bohle 4/17/2018

BK 3/12/2018

TITLE

SCALE

SIZE

DRAWING NUMBER

PROJECT #

SHEET       OF 

9630-50-CRT-12-5

170926-3

02

PROPERTY OF ATI INDUSTRIAL AUTOMATION, INC. NOT TO BE REPRODUCE

D IN ANY 

MANNER EXCEPT ON ORDER OR WITH PRIOR WRITTEN AUTHORIZATION OF A

TI.

 

Compliant Reciprocating Tool Customer Drawing, 12k  Strokes per Minute, 5mm Stroke

1031 Goodworth Drive, Apex, NC 27539, USA Tel: +1.919.772.0115       www.ati-ia.com Fax: +1.919.772.8259      ISO 9001 Registered Company

Summary of Contents for 9150-CRT
































Reviews:

No comments