COMPANY CONFIDENTIAL
62
2.5.3.2.1 Station (sta)
This type of list provides information for each station associated with the indicated VAP. The following
listing is produced:
ADDR AID CHAN RATE RSSI IDLE TXSEQ RXSEQ CAPS ACAPS ERP STATE HTCAPS
00:03:7f:08:62:23 1 36 6M 59 135 13 12128 E 0 33 Q WME
The list elements are described as follows:
ADDR
MAC address of the station
AID
Association ID. This is used to determine the specific AP/Station association pair used in 802.11n test commands.
CHAN
Channel device is associated on
RATE
Current data rate of the association
RSSI
Signal strength of the last received packet. For MIMO devices, this is an average value over all active receive
chains.
IDLE
Current setting of the station inactivity timer. This is the time in ms when the station will go into power save of no
activity occurs on the link.
TXSEQ
Transmit sequence number of the last received packet
RXSEQ
Receive sequence number of the last received packet
Current
capabilities of the station. These are alphanumeric characters corresponding to specific 802.11 capability
bits in the beacon and probe response Responses are defined as follows:
E
ESS
P
Privacy
S
Short Slot Time
I
IBSS
S
Short Preamble
D
DSSS/OFDM
c
Pollable
B
PBC
C
C
Poll Request
A
Channel Agility
ACAPS
Current Advanced (Atheros) capability flags. These are alphanumeric characters corresponding to the flags that are
set for the advanced Atheros capabilities. Defined as follows:
D
Turbo G
F
Fast Frame
A
Advanced Radio
C
Compression
X
XR Radio
T
Boost
ERP
Transmit Radiated Power (ERP) in dBm. A value of 0 indicates a legacy station. Printed in hexadecimal.
STATE
Current state of the station. This is an hexadecimal value that consists of the following individual bits:
0x0001
Authorized for data transfer
0x0040
uAPSD enabled
0x0002
QoS enabled
0x0080
uAPSD triggerable
0x0004
ERP Enabled
0x0100
uAPSD SP in Progress
0x0008
HT Rates enabled
0x0200
This is an ATH node
0x0010
Power Save Mode enabled
0x0400
WDS Workaround req
0x0020
Auth reference held
0x0800
WDS link
HTCAPS
The HT capabilities flags. These are character indicators that represent a capability of the 802.11n station
A
Advanced Coding
Q
Static MIMO Power Save
S
Short GI enabled (HT 40)
W
HT40 Channel Width
R
Dynamic MIMO Power Save
D
Delayed block ACK
P
MIMO Power Save enabled
G
Greenfield Preamble
M
Max AMSDU size
(no Header) All Information Elements for the attached station are printed. These have the following values:
WPA
WPA Information Element
VEN
Vendor Specific Information Element
WME
WMM Information Element
RSN
RSN Information Element
ATH
Atheros Vendor Information Element
???
Unknown Information Element
