COMPANY CONFIDENTIAL
20
2.4.3 Virtual AP (VAP) Configuration Page
For each VAP (1-4) its individual parameters can be configured through this page. Note that there are selections for
VAP 1-4 on the left panel. These parameters specify things like the ESSID string, which radio to use (for dual
concurrent platforms), VLAN information, initialization mode, and Security Modes.
In this document the various sections of the page are shown in two sections, because a readable screen shot of the entire
page was not possible. The web interface presents all parameters as a single page.
Figure 5 VAP Configuration Page (1 of 2)
Table 5 VAP Configuration: Page Parameters
Parameter Env
Var
Description
ESSID String
AP_SSID#
SSID String for the Virtual interface. For Client mode VAPs, this is the ESSID of the
BSS to
join to. For AP’s, this is the SSID advertised in the beacon.
Radio
AP_RADIO_ID# I
ID of the radio that this VAP is assigned to. Virtual interface to physical interface
mapping.
VLAN ID
AP_VLAN#
If this VAP is to be included in a VLAN group, the VLAN ID number of the group
VLAN Bridge
AP_BRNAME
Name of the bridge that is used by this VLAN. Ethernet instances will be added to the
bridge
for the VLAN
VAP Mode
AP_MODE#
Indicates the operating mode for the VAP. See table 1 for details
Root AP MAC
Address
ROOTAP_MAC#
Identifies the MAC address of the WDS root when creating a VAP for WDS Client
mode.
