COMPANY CONFIDENTIAL
51
doth_reassoc
#iwpriv ath
N
doth_reassoc
value
This command instructs the driver to generate a reassociation request. The single value provided is not used.
This is more of a single-shot action rather than a setting. This command has no default, and no corresponding
get command.
#iwpriv ath0 doth_reassoc 1
get_countrycode
#iwpriv ath
N
get_countrycode
This command will return the current setting of the country code. The country code values are listed in
Appendix A.
#iwpriv ath0 get_countrycode
ath0 get_countrycode:736
markdfs
#iwpriv ath
N
markdfs 1|0
This command will enable or disable the “marking” of DFS channels. A channel is “marked” if a radar is
detected on the channel, and it is put in the Non-Occupancy List (NOL). This is only used for testing, and
should not be used in an operational environment. This command has a corresponding get command, and its
default value is 1.
#iwpriv ath0 markdfs 1
#iwpriv ath0 get_markdfs
ath0 get_markdfs:1
regclass
#iwpriv ath
N
regclass 1|0
This command enables or disables the addition of the regulatory triplets into the country IE sent in the beacon.
A value of 1 will enable the regulatory triplets. This command has a corresponding get command, and its
default value is 1.
#iwpriv ath0 regclass 1
#iwpriv ath0 get_regclass
ath0 get_regclass:1
