ATH-Heinl M126, Operating Instructions Manual

Page: 70 / 354

® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 24 -
3.2 Basic Information
Independent operation of the machine may only be carried out by persons over the age of 18 who have
been trained in the operation of the machine and have demonstrated their ability to do so to the employer.
They must be expressly contracted by the employer to operate the machine. The order to operate the
machine must be given in writing.
The machine must only be used for its intended use.
Always use appropriate material during installation and operation.
Before assembly or disassembly check all components for damage.
If necessary, observe special manufacturer instructions for mounting or dismounting of vehicle-specific
work.
An important part of the guarantee / warranty is fulfilment of the maintenance plan. This includes in
particular, ensuring cleanliness, corrosion protection, checks and repairing damages immediately if
required.
During operation attention should always be paid to hazards. As soon as dangers occur, switch off the
machine immediately, remove the mains plug and disconnect the air supply.
Then contact your dealer.
All warning labels must always be easy to read. If damaged, they must be replaced immediately.
Pay attention to possible shearing points around the machine.
During operation, the noise can reach 85dB (A), so the operator should take appropriate
protective measures.
Moving parts of the machine can catch loose clothing, long hair or jewellery.