32
Setting the maximum stroke height
1
Lifting fork height
Displays the height of the lifting fork
2
Maximum height
Displays the maximum lifting height
To set to the previous value, press to open the input pop up window. Enter new value and press Enter to confirm.
The default value is 1.70m and must not be exceeded.
3
Safety height
Displays the safety height
To set to the previous value, press to open the input pop up window. Enter new value and press Enter to confirm.
The default value is 0.1m and must not be undercut.
4
ESC
Press this key to return to the settings page or to save your entries.
On this page the mode selector must be set to 1 before a value can be changed or
saved.
Calibration stroke height
Enter the password: 77777777 to access the settings page.
® Copyright ATH-Heinl GmbH & CO.KG, All rights reserved / Misprints and technical changes reserved
Release date: 10-2022 / Product manufacturer ATH-Heinl GmbH & CO. KG
