® Copyright ATH-Heinl GmbH & Co. KG, 2013, All rights reserved. / Misprints and technical changes reserved / Issue: 09/2016
12
Assembly of lift
This manual is
not
to be seen as an assembly instruction, but only as a help and advice for skilled personal. For
the following works are necessary the adequate clothes and safety equipment. An incorrect installation and
adjustments causes disclaimer of warranty.
1. Positioning and alignment
a. By means of chalk the position for the installation can be marked before.
b. Pay attention to the drive-on direction while positioning the scissors.
c. Position the control box as indicated in the technical data.
2. Fixing with safety anchors:
a. Bore holes and pay attention to the
necessary boring depth A and boring
diameter of the anchor manufacturer
b. Clean the inner oft he holes
c. Put the anchors into the holes until the
needed depth is reached.
d. Tight the nuts with the torque specified by
the manufacturer.
Thickness B depends on floor cover.
