www.atestgaz.pl
Shielded cables applied for connecting detectors
– preparation and installation
The cable shall be prepared in accordance with the following guidelines (see also 1):
the cable external sheath shall be removed at the applicable length (see 1),
the cable shield shall be cut right by the end of the external sheath,
the cable shield shall be protected with isolation,
at the ends of the cables, isolated clamp sleeve shall be placed,
he conductive part of the clamp sleeve shall have applicable length (see 1).
For the systems with RS-485 interface, it is necessary to make sure that A and B transmission
signals as well as + and – power supply were led with the use of the cables which belong to
one pair.
Atest Gaz
A. M. Pachole sp. j.
ul. Spokojna 3, 44-109 Gliwice, Poland
VAT No.: PL 9691433231
tel.: +48 32 238 87 94
fax: +48 32 234 92 71
e-mail: [email protected]
p. 1/2
Appendix: PU-Z-015-ENG R02
•
Figure 1: Cable preparation
200 mm
5-6 mm
Max 30 mm
Protected cable shield
Clamp sleeve
Summary of Contents for Sigma SmArt
