Atest Gaz Sigma SmArt, User Manual

Page: 38 / 84

www.atestgaz.pl
Sigma SmArt hardware configuration marking
Device Trade name
Code Sensor Cable gland
Type - M D H E T S W (Note 1)
Gas Detector Sigma SmArt PW-044 SM
TS
EL
ELm
VOC
DET
IR
PID
0
LCD
FLED
FLED.A
HL
HH
ALB
ALZ
SS
C
0
T
S-X-X.X
3,2 – 8 mm
6,5 – 11,9 mm
10 – 14 mm
Note 1 : For E = ALB, ALZ, C – material brass nickel plated, for E = SS – material stainless steel. Cable gland
mounted on the right.
M – converter module Limited use
TS electrochemical
EL catalytic
ELm catalytic • up to 40% LEL
VOC hot-wire
DET semiconductor
IR infra-red
PID photoionization
D – display Limited use
0 without
LCD with window – LCD display and LED controls • -20 – 50°C ( Note 2 )
FLED with window – bright, multi-colour display • -40 – 60°C
FLED.A
with window – bright, multi-colour display equipped with an acoustic
signaller
• -40 – 60°C
Note 2 : At -20°C the display contrast may be reduced (difficult to read).
H – head Limited use
HL sensor cover with sinter, made of stainless steel • only hardly reactive gases
1
HH sensor cover with sinter, made of stainless steel, warmed • possibility to realization for M = IR, M = PID
E – enclosure Limited use
ALB aluminium, spray epoxy – white
• gas temperature class T6: -40 – 70°C
• gas temperature class T5: -40 – 85°C
ALZ aluminium, spray epoxy – yellow
C aluminium, creodur coating – natural aluminium
SS stainless steel
1 E. g. CO, CH
4
. For reactive gases please use Sigma ReAct.
Atest-Gaz A. M. Pachole sp. j.
ul. Spokojna 3, 44-109 Gliwice, Poland
VAT No.: PL 9691433231
tel.: +48 32 238 87 94
fax: +48 32 234 92 71
e-mail: contact@atestgaz.pl
p. 1/2 Appendix: PU-Z-055-ENG R03
•