Atest Gaz Sigma SmArt, User Manual

Page: 75 / 84

www.atestgaz.pl
3.3 Detector’s state signalling – special states
Situation Description Indicators/display
Heating Preparation of the detector to work. Its indications are
ignored.
The indicators are lit one after another in the clockwise
direction.
The display shows message Wygrzew (Heating).
Calibration The detector is in calibration state – its indications are
ignored.
MONITORING indicator flashes evenly. The remaining
indicators are turned of.
The display shows message Kalibracja (Calibration).
Test The detector is in test state – its indications are simulated
and all signals are treated as real. Gas alarms and failures
are possible.
MONITORING indicator – two flashes per 2s
(
_∏_∏_____
).
The display shows Test message.
Non-critical
failure Detector malfunction that may negatively impact its
measurement accuracy (e.g. exceeding of time until
periodic calibration or small zero drift).
The detector still performs measurement.
FAULT indicator flashes evenly.
Critical failure The detector is damaged and does not perform
measurement.
“FAULT” indicator is lit continuously, the remaining ones
are turned of.
The display shows AWK2100H message.
Atest-Gaz A. M. Pachole sp. j.
ul. Spokojna 3, 44-109 Gliwice, Poland
VAT No.: PL 9691433231
tel.: +48 32 238 87 94
fax: +48 32 234 92 71
e-mail: contact@atestgaz.pl
p. 3/5 Appendix: PU-Z-073-ENG R02
•
ALARM
1
2
FAULT
S/N XXX
Wygrzew
.
ALARM
1
2
FAULT
MONITORING
0,0 ppm
Kalibracja
ALARM
1
2
FAULT MONITORING
0,0 ppm
Test
ALARM
1
2
FAULT MONITORING
0,0 ppm
_____
ALARM
1
2
FAULT MONITORING
0,0 ppm
AWK2100H