ATESS EVD-300D, User Manual, Page: 9 / 14

3
.
1
.
5 After charging is complete
1. If the charging mode is Plug
&
Charge mode, need to click the corresponding gun A or B to stop
charging.
2. If the charging mode is APP
/
RFID mode, need to click the corresponding gun A or B first, then swipe
the card to finish charging or complete the subsequent stop charging operation on the app.
 If the screen shows the machine fault please do not charge, please contact the staff;
 When credit card to confirm the balance of IC card sufficient, the lack of balance in the charging
process will automatically terminate the charge;
 When two charging guns are used at the same time, the user should carefully identify whether
they are A users or B users and swipe the card according to the operation prompt of the interface to avoid
misoperation;
 Please operate according to the charging equipment related instructions;
 When plugging and unplugging the gun pay attention, must not be too hard;
 During the card swiping operation, you need to hear "beep" beep to remove the card, otherwise it
may cause the operation to fail;
 When charging gun plugged in EV and charger lit the yellow light, do not operate the charging
gun to prevent electric shock.
 Press the emergency button in case of fault happening.
 Check the SPD frequently. If the below observing window becomes red, the SPD is already broken
and needs replacing.
3.3 Operational precautions

During the process of using, dust should be regularly collected on the top, and the air inlet
air filter or air filter should be cleaned or replaced. During the process of replacing the air filter,
the product needs to be powered off.
Fig 3-1-1 AC SPD
Fig3-1-2 Dust net and ventilation diagram
1.inlet air flow 2. dust filter taken out direction
3.4 Indicator light description
There are three status lights above the device, yellow, green and red lights respectively.

Green: Is the power indicator, stead green light on the device after power on.

Yellow: Charging, yellow light on; charging stopped, yellow light off; yellow light flashing,
charging gun being connected.

Red: Equipment failure, red light; failure solved, red light off.
14 13