Safety Precautions
Before operating, please read the instruction manual carefully to understand the correct usage of
the equipment. Please read it completely and save properly for future reference.
In order to ensure the personal and property safety of the user at the time of installation of the
product, relevant information is provided in the manual and highlighted with appropriate
symbols. The following is a list of symbols that may be used in this manual. Please read these
instructions carefully to make better use of this manual.
2
Danger!
This means there is a high level of potential danger that could result in death or
serious injury if not avoided.
CAUTION
I
ndicates a potential risk that, if not avoided, may cause the device to
malfunction and a loss of property.
High voltage!
Touching may cause electric shock
.
The equipment contains AC and DC power
terminals, which must be disconnected from each power supply individually
and wait at least 5 minutes for service.
PE terminal
PE terminal must be firmly connected to earth to ensure the safety
of personnel.
1
)
Do not place dangerous items such as flammable, explosive or flammable materials, chemicals,
combustible vapors near the DC charger;
2
)
Keep the charging connector clean and dry, if dirty, please wipe it with a clean dry cloth,
Touching the conducting part of charging connector when charging is strictly prohibited;
3
)
It is strictly forbidden to use the charger if the following cases is found - charging connector or
charging cable defect, charging cables cracks, abrasion, rupture or exposed, etc. If found, please
contact the staff immediately;
4
)
Do
n
ot
a
ttempt
t
o
d
isassemble
,
r
epair
o
r
m
odify
t
he
p
roduct
.
N
o
u
ser
s
erviceable
parts
inside
.
A
ny
s
uch
r
equirements
p
lease
c
ontact
t
he
s
taff
,
i
mproper
o
peration
will
cause
d
amage
,
w
ater
l
eakage
o
r
e
lectricity
l
eakage;
5
)
It is forbidden to unplug the charging connector during charging to ensure the safety of
personnel and vehicles.
6
)
In case of any unusual situation during the usage, immediately press the emergency button to
cut off all input and output power;
7
)
It is not suggested to charge in rain and thunder weather;
8
)
Children are not to approach the charger during charging process to avoid injury.
9
)
Please close the doors on both sides to avoid electric shock during charging.
10
)
During the charging process, the vehicle is prohibited from driving and can only be charged
when it is stationary. Engine must be turned off before charging hybrid vehicle.
1
Overview
1.1 Product introduction
The integrated dual-gun DC fast charger is mainly used for DC quick charging of electric vehicles.
This product integrates power conversion, charging control, human-computer interaction
control, communication and billing and metering, and has good dustproof and waterproof
functions, IP54 degree of protection, safe operation and maintenance outdoors. It is the best
choice for outdoor fast DC charging.
Fig1.1.1 outline drawing
1.1.1 Front panel introduction
Fig1.1.2 Front panel
1
1
2
3
4
5
6