ATEN VS0801HB, User Manual

Page: 14 / 31

Chapter 2. Hardware Setup
6
Rear View
No. Component Description
1 Power Jack Connects to the power adapter cable.
2 Auto Switch ON/OFF Enables or disables the next mode. For details, see
Setting the Switch Mode , page 13.
Note: When the Auto Switch is put to ON , the VS0801HB
will remain in next mode regardless of any RS-232
commands to set the unit into other switch modes.
3 HDMI Out Port Connects to the HDMI In Port on the display device.
4 HDMI In Port Connects to the HDMI Out Port on the source device.
5 IR Extend Connects to an IR Receiver to extend the reception range
for IR signals.
6 RS-232 Serial Port Connects to a serial controller via a serial cable.
1 2 3
4
5 6