ATEN VS0801HB, User Manual

Page: 13 / 31

5
Chapter 2
Hardware Setup
Components
Front View
No. Component Description
1 Port Selection
Pushbuttons Press a Port Selection Pushbutton to route the HDMI source
from the corresponding input port to the output port for
display.
2 Port LEDs A Port LED lights green to indicate that the corresponding
port has been selected.
3 Power Button Press to enable the standby mode, a low-power mode where
the port selection pushbuttons, port LEDs, and IR receiver
are disabled. To disable the standby mode, press the power
button again.
4 Power LED Lights green to indicate that the VS0801HB is in standby
mode.
1
2
3 4