ATEN VP1920, User Manual

Page: 32 / 39

Chapter 3. Operation
24
Source Auto Switch
Š
ON
Š
OFF
Enables this function to have
Display A automatically switch to a
newly connected source.
Source 1 Š
Auto
Š
HDMI
Š
VGA
Sets the input source for Source 1.
Select
Auto to allow input from the
connected HDMI or VGA source.
When
Auto is selected, the input
defaults to the HDMI source.
Source 2
Š
Auto
Š
HDMI
Š
DisplayPort
Sets the input source for Source 2.
Select
Auto to allow input from the
connected HDMI or DisplayPort
source. When
Auto is selected,
the input defaults to the HDMI
source.
Source 3
Š
Auto
Š
HDMI
Š
AV / YPbPr
Sets the input source for Source 3.
Select
Auto to allow input from the
connected HDMI or AV/YPbPr
source. When
Auto is selected,
the input defaults to the HDMI
source.
EDID
Š
Display A
Š
Remix
Š
Default
Š
Display A: Sends the EDID
information of the Display A to
the displayed sources.
Š
Remix: Sends the optimum
EDID among the connected
displays to the sources.
Š
ATEN default: Sends the pre-
defined EDID to the displayed
sources.
Maintenance Firmware Upgrades Upgrades the VP1920 firmware.
Note: Save the firmware file to a
USB drive and plug it into the
VP1920 before the upgrade.
Reset to Default Sets the VP1920 to its default
settings.
Exit Closes the OSD.
System Setting
Description
Note: Default settings are indicated in bold.