ATEN VM5808H, User Manual

Page: 29 / 88

Chapter 3. Front Panel Configuration
19
LCD Menu Organization
The VM5808H has a built-in configuration utility via the front panel LCD,
which can be controlled by pressing the
MENU and front panel Input
pushbuttons (1–8). User can cycle through the menu options, starting from IP
Setting page, in the order shown in the table below:
Note: The highlighted values are the default settings of the VM5808H.
Menu Pushbutton
Press the MENU pushbutton to switch between the Main Screen and LCD
Menu page. When the Menu is active, the MENU pushbutton’s built-in LED
lights up:
From the Menu page:
Š
Press 1 to go to the IP Setting page (see IP Setting , page 20)
Š
Press 2 to go to the Serial Port Setting page (see Serial Port Setting ,
page 21)
Š
Press 8 to go to the next page(s) for the sub-menu pages
Š
Press Menu or Cancel to return to the Main Screen
Menu Page Sub-Menu Page(s)
IP Setting IP Address
Subnet Mask
Gateway
Serial Port Setting Baud Rate 9600 / 19200 / 38400 / 115200
Operation Mode EDID Default / Port1 / Remix / Customized
CEC On / NA
OSD On / NA
Output Status On / NA
Security Mode Password Enable / Disable
Change Password Old Password New Password
Save to a Profile Save to a Profile No 01–32
1: IP Setting
2: Serial Port Setting
8: Next