ATEN VM5808H, User Manual

Page: 33 / 88

Chapter 3. Front Panel Configuration
23
2. Press pushbuttons 1–4 to make your selection.
EDID Mode options are:
3. Press Menu to return to the Menu page.
4. Press Cancel to return to the previous step without saving.
CEC
To configure the CEC setting, do the following:
1. From the Operation Mode page, press pushbutton 2 :
2. Press pushbuttons 1–8 to enable ( ON ) or disable ( NA ) the CEC feature for
the output port. If the port does not support CEC, an NA is shown.
Note: The default CEC setting is NA.
3. Press Menu to return to the Menu page.
4. Press Cancel to return to the previous step without saving.
EDID Option Description
1: Port1 The EDID from port1 is passed to all video sources.
2: Default The default EDID is passed to all video sources.
3: Remix Uses the EDID of each connected display according to its
connection when the VM5808H is first powered on, or
immediately after pressing 3 to select the Remix option.
4: Customized Automatically retrieves and saves the EDID settings of a
connected monitor/display device to an input source port. This
can be configured using the Browser GUI. See
Customized
Mode , page 44.
1: Port 1 3: Remix
2: Default (In use) 4: Customized
1: EDID Mode
2: CEC
8: Next
OUTPUT 1 2 3 4 5 6 7 8
NA ON ON NA ON NA ON NA