ATEN VM5808H, User Manual

Page: 74 / 88

VM5808H User Manual
64
EDID Commands
Extended Display Identification Data (EDID) is a data format that contains a
display's basic information and is used to communicate with the video source/
system. You can set which EDID mode the VM5808H uses with the following
command:
EDID C Control (port1 / remix / default) [Enter]
For example, to use the Port1 EDID mode, type the following:
edid port1 [enter]
The following tables show the possible values and formats for the Control
command:
Note: Each command string can be separated with a space.
The following table shows the available command list:
Command Description
edid Enable EDID selection
Control Description
port1 Implement the EDID of the connected
display to Port 1, and pass it to the
video source
remix Implement the EDID of each
connected display according to its
connection when the VM5808H is first
powered on, or immediately after
selecting the Remix option
default Implements ATEN’s default EDID
(default)
Command Control Enter Description
edid port1 [Enter] The EDID from Port 1 is passed to the video
source
edid remix [Enter] The VM5808H implements the EDID of each
connected display according to its connection
when the VM5808H is first powered on, or
immediately after selecting the Remix option.
edid default [Enter] ATEN’s default EDID is passed to the video
source