ATEN VM5808H, User Manual

Page: 23 / 88

13
Chapter 3
Front Panel Configuration
Overview
The VM5808H can be configured and operated locally via the front panel
LCD/pushbuttons and the IR Remote Control; remotely over a standard TCP/
IP connection via graphical user interface (GUI) using a web browser; via a
remote terminal session using Telnet; or by a RS-232 serial controller.
The local front panel operation is discussed in this chapter. System Operation
is discussed in Chapter 4, and RS-232 serial control is discussed in Chapter 5.
Front Panel Pushbuttons
The VM5808H front panel features an LCD display and pushbuttons for
convenient configuration and operation locally. This allows users to perform
operations such as selecting which source shows on which display, viewing the
IP settings, configuring the serial port, setting the EDID Mode / CEC / OSD /
Output Status, selecting security settings, and loading/saving connection
profiles.
Note the following front panel pushbutton functions:
Š
Use the MENU pushbutton to access the Menu page options: IP Setting,
Serial Port Setting, Operation Mode, Security Mode, and Save to a Profile
(see
LCD Menu Organization , page 19).
Š
Use the PROFILE pushbutton to switch between the connection profiles
which have been added to the Profile List (see Profile , page 52). Pressing
this pushbutton for longer than 3 seconds displays the Save to a Profile
page (see
Save to a Profile , page 28).
Š
Use the CANCEL pushbutton to go back to a previous page, return to the
Main Screen, stop or exit an operation.
Š
Use the ENTER pushbutton to select options and confirm operations.
Š
Use the INPUT / OUTPUT ( 1–8 ) pushbuttons to select the Input/Output
port. These pushbuttons may also correspond to menu options, connection
profiles, and so on.