Chapter 3. Front Panel Operation
47
CEC
To configure the CEC settings, do the following:
1. From the Operation page, press pushbutton
2
to access the CEC page:
2. Press pushbuttons 1–16 to enable (
ON
) or disable (
NA
) the CEC feature
for the output port. If the port does not support CEC, an
NA
is shown.
Note:
The default CEC setting is Off.
3. Press
Menu
to return to the Menu page.
4. Press
Cancel
to return to the previous step without saving.
1: EDID Mode: Default
2: CEC
3: OSD
4: Output Status
OUTPUT
1 2 3 4 5 6 7 8
NA NA NA NA ON NA ON NA
OUTPUT
9 10 11 12 13 14 15 16
ON ON ON ON NA NA NA NA
