ATEN VM1600 User Manual Download Page 58

Page: 58 / 158

Modular Matrix Solution User Manual

EDID Mode options are:

3. Press

Menu

to return to the Menu page.

4. Press

Cancel

to return to the previous step without change.

Note:

The default EDID setting is Default.

EDID Option

Description

Default

ATEN’s default EDID data is passed to all video sources by

default when the system is powered on.

Port1

EDID data read from port 1 is passed to all video sources.

The system will enforce the Default EDID setting if port 1 is

not occupied.

Remix

This mode reads the EDID data from all connected displays

and generates the optimum EDID for all video sources. The

system will not re-generate a new EDID when a new device

is plugged in, unless triggered by a pushbutton or command.

Customized

This mode features an EDID Wizard that allows user-

defined EDID configurations for optimum output.

See

Customized Mode

, page 93.

Summary of Contents for VM1600































































































































































Search results

Summary of Contents for VM1600

Reviews:

Related manuals for VM1600

Brands by name

Popular brands

ATEN VM1600, User Manual

Search results

Summary of Contents for VM1600

Reviews:

Related manuals for VM1600

Brands by name

Popular brands