Modular Matrix Solution User Manual
32
Front Panel LCD
The VM1600 features an LCD display for convenient configuration. This
allows you to perform operations such as viewing the IP settings, configuring
the serial port, setting EDID/CEC/OSD/Output Status, selecting security
settings, and loading/saving connection profiles.
LCD Password
If the VM1600 has been configured to require a password for local operation
(see
, page 51), the password screen appears when the VM1600
is powered on, and the cursor flashes on the first digit. Enter a 4-digit password
to continue to the Main Screen.
Note:
If you are accessing the VM1600 for the first time, the default password
is 1234.
To enter a password, do the following:
1. Check that the cursor is flashing on the first digit.
2. Use the front panel number pushbuttons (1-9) to enter a 4-digit password.
After the fourth digit, the cursor goes back to the first digit.
3. Press
Cancel
to clear the password. The digits revert to 4 asterisks (*) and
the cursor returns to the first digit.
Note:
1. The VM1600 password can be any four digit combination
between 1111 to 9999.
2. If you enter an incorrect password, the cursor goes back to the
first digit and reverts to flashing. The Incorrect Password message
displays at the bottom of the screen, but clears as soon as a new
digit is entered.
, page 51) is Enabled, the LCD
display time-out is 5 minutes by default.
Enter Password: * * * *
Incorrect Password
